Repiping is simply the act of replacing pipes in your plumbing system. When and how you should repipe a home are often the parts that most confuse people, however. In today’s post, we’ll go over three of the most common questions regarding repiping.
Does Age Factor Into Repiping?
Yes, and that can be for two reasons:
The first is that older pipes will most likely corrode and leak sooner simply due to age. If multiple leaks occur in the home, there’s a good chance that the entire plumbing system is at the end of its lifespan.
The second is when the pipes in your home are made of materials no longer deemed safe for the home. Those types of piping include:
- Lead: Lead pipes were used in the 1900s before lead poisoning was realized. If you did have lead pipes in your home, it would most likely be due to living in a historical home.
- Polybutylene: While initially thought to be low-cost and easy to install, these pipes are prone to breakage and should be replaced immediately.
- Galvanized steel: Not only can these pipes contain traces of lead, but age causes them to rust and corrode from the inside. That can lead to leaks and eventual water damage.
How Much of the Home Needs to be Repiped?
Whole-house repiping may be necessary at times, or, you’ll simply need a section of pipe replaced instead. It depends on the situation.
If your home was made with lead piping, or if all the pipes in your home have aged at about the same rate and are now deteriorating, those would be good cases for repiping the entire home. However, it could be the case that you have just one faulty section.
If leaks seem to be happening frequently, you’ll want to take note. Chronic leaks from different areas of the home could indicate the need for whole-house replacement. Without that happening, however, there’s no guarantee that you need the entire plumbing system repiped.
Which Are the Best Types of Pipe to Replace With?
There’s no single pipe that should be used in every plumbing situation. Choosing the right pipe depends on factors like the material, the pipe’s ability to handle extreme temperatures, and its flexibility. An expert of plumbing services in Phoenix will be able to choose the right pipes for each situation.
- CPVP: Chlorinated polyvinyl chloride is a popular plastic pipe that’s used today. That’s thanks to its low cost and for its ability to withstand high temperatures. They’re usually used for drain pipes and hot water piping.
- Copper: Copper piping is a plumbing favorite. It’s capable of lasting 70 to 80 years and can be used in most plumbing applications without issue. However, it can become susceptible to leaks if the mineral content in the water and in the surrounding soil creates pitted corrosion.
- PEX: Cross-linked polyethylene is another common choice, only second to copper. PEX is easy to install, durable, and even less expensive than copper. Again, the application of this pipe is what makes all the difference, so it should be used depending on the situation rather than for your entire plumbing system.