No homeowner sets out to wastewater on purpose. There’s no reward in that! The problem is that it’s easy to unintentionally wastewater and then continue to let it happen. You’re probably using more water than you need to right now and be unaware of it. Even higher bills may not alert you, because if the problem has been going on long enough, the bill will always be high!
When it comes to household plumbing in Surprise, AZ, we’re the experts. We’ve often helped our customers enjoy better plumbing and save water, so we know about the many ways households can wastewater. We’re going to look at seven ways you may be wasting water and what you can do about it.
ONE: Overlong showers
Yes, you’ve heard this one. We want to repeat it, because cutting down on the time spent running water in the shower can make an enormous difference in monthly water consumption. We recommend you time your showers. If they are over five mins, even if it doesn’t seem long to you, it’s still too long.
TWO: Unfixed leaks
Hidden leaks is the source of one trillion gallons of water going to waste across the country each year. Of course, it’s difficult to notice a leak that’s hidden, but you can watch for signs. If you suspect hidden leaks or you’ve never had your house checked for them, call our plumbers for leak detection services.
THREE: Running the dishwasher that’s not full
Did you know that using the dishwasher to handle cleaning the dishes uses less water than washing them by hand? It’s true—but only if the washer is used to the fullest, i.e. when it’s full. Running a half-loaded dishwasher is wasteful. (We also recommend using the “light” setting on the dishwasher to help reduce consumption.)
FOUR: Running a half-full laundry load
This is similar to the washing machine mistake. You’ll conserve water if you only run the washing machine when it’s loaded to maximum capacity. You may also wish to install a new washing machine with water-saving features if your current one is more than ten years old. (Look for the WaterSense label.)
FIVE: Keeping an old toilet
The standard toilet, depending on its age, uses from 2–6 gallons per flush. New low-flow toilet models use less than 1½ gallons per flush. Making the change from an old toilet to a low-flush one will have a big impact on water use in your house because the toilet accounts for the highest amount of indoor water consumption. We install low-flow models and are happy to help you with the upgrade.
SIX: Running the water while you brush your teeth
We don’t know why people often have the faucet running during their teeth-brushing regimen, but it’s common. Try to break this habit, because it does make a difference.
SEVEN: Unnecessary toilet flushes
Please don’t use your toilet as a trash can! It’s only for human waste and toilet paper. Using it to dispose of other items not only wastes water, it risks creating clogs.
We’re here to help you to save water: new installations, leak detection, and more much more.
You can trust in The Trusted Plumber! Call us for plumbing service in Glendale, AZ and the surrounding areas.